News

Home > News > Content

Scanner Installation Method

Usually, there are three kinds of bar code scanner interface data lines, which are USB data line, rs232 data line and PS/2 data line. We understand these and know how to use the barcode scanner. Below we will introduce the different ways of using different data lines.

First, USB data cable connection

 Barcode scanner connected to USB data cable

1) Connect the device interface end (RJ 45 1, interface) of the USB data cable to the barcode scanner;

2) Connect the host interface end (USB interface) of the USB data cable to the host;

Second, rs232 data cable connection (serial data cable)

 Barcode scanner connected to RS232 data cable

1) Connect the device interface end (RJ 45 1, interface) of the RS232 data line to the barcode scanner;

2) connect the host interface end (RS232 interface) of the RS232 data line to the host;

3) Connect the RS232 data cable to the HR100 series through the power adapter

Third, PS/2 data line (keyboard port data line)

 Barcode scanner connected to PS/2 data cable

1) Connect the device interface end (RJ 45 1, interface) of the PS/2 data line to the barcode scanner;

2) Connect the host interface end (PS/2 interface) of the PS/2 data cable to the host;

3) If necessary, connect the PS/2 data cable to the HR100 series through the power adapter;

4) If necessary, connect the normal keyboard to the female end of the PS/2 cable.